>Support 1 GPON port and 4 Gigabit electrical ports
>Support 1-way in and 3-way out power management interface, and support 12VDC / 24VDC / 48VDC and 220VAC wide range input / output management
>Different SLA parameters can be configured for different users and businesses
> Supports single fiber bidirectional high bandwidth service bearer, and the uplink and downlink can reach 1.25gbps at the same time
>Small volume and low power consumption, and the electromagnetic compatibility reaches level 4 standard
>-40 ℃ ~ + 85 ℃ wide temperature design, the equipment is suitable for installation in some site environments
>IP40 grade protection, high strength metal shell, no fan, low power consumption design
IP2000-2105-PM13-AC Industrial PON Terminal Optical Network Unit ONU which meet with international standard of IEEE802.3ah,Communications industry standard of the People's Republic of China（YD/T 1475-2006）,and the EPON device CTC standard of China Telecom. Featuring mature technology and open network standards, wide range operating temperature range, strong anti-electromagnetic interference, anti-salt fog, shocks, vibration resistance, and redundant dual power supply (DC 12~48V) or single power supply (AC 220V) optional, the IP2000-2105-PM13-AC Industrial PON Terminal Optical Network Unit meets the harsh environmental requirements of industrial sites, and provide an efficient, reliable and fast data communication solution.
IP2000-2105-PM13-AC Industrial PON Terminal Optical Network Unit ONU is is equipped with one GPON port and four Gigabit ports, supports one input and three output power management, and supports a wide range of power management of 12VDC ~ 48VDC and 220VAC. It is flexibly used for the power management and control of subordinate equipment, especially suitable for smart city and other industrial applications. It greatly facilitates the remote management and maintenance of equipment, reduces the later operation and maintenance cost, makes the equipment safe, stable and reliable, and creates a rock stable industrial Internet of things.
Specification
Port Information | EPON Port：One bidirectional 1.25gbps PON port, SC / PC interface |
| Gigabit electrical port: 4 RJ45 electrical ports, 10 / 100 / 1000Mbps adaptive | |
Console Port：One RJ45 serial debug port | |
| Power management interface: 1-way input, 3-way output, 2-core 5.08mm spacing terminal block | |
| Serial interface: one RJ45 debugging serial port | |
Mechanical Structure | Dimensions：138 mm（W）× 115mm（D）×55 mm（H） |
Mounting: DIN rail mounting | |
Weight：<2kg | |
Protection Grade：IP40 | |
Environmental Requirement | Operating Temperature：-40℃～ +85℃ |
Storage Temperature：-40℃～ +85℃ | |
Relative Humidity：5% ～ 95% (non-condensation) | |
MTBF : 500000 h | |
PON Properties | PON port speed：up-link and down-link symmetry, 1.25Gbps |
Covering radius： 20km | |
Optical connector type：SC/PC | |
Optical physical condition：1000 BASE-PX20 | |
Receiving sensitivity：-30dBm | |
Security：Optical Network Unit supports MAC address authentication, Optical power detection DDMI, 1000BASE-PX20+ standard | |
Software Features | Spanning tree：STP/RSTP |
Multicast: IGMP Snooping V1/2/3, controllable multicast | |
VLAN：4K VLAN, Q in Q, Access, Trunk, VLAN Stacking, VLAN Translation | |
QOS ：802.1p Cos, DSCP, 4 priority queues, SP, WRR scheduling discipline, traffic classification, port rate limit, DBA | |
Storm Suppression：Broadcast storm suppression, Unknown-Multicast suppression and Unknown-Unicast suppression. | |
Port mirroring：one-to-one port mirroring , 0ne-to-multiple ports mirroring | |
Flow control：Full duplex IEEE 802.3x, half duplex back-pressure flow control | |
ACL：Port-based, IP-based, MAC-based, VLAN ID-based | |
Security：Defend against DoS, 802.1x | |
Management ：CLI（telnet/SSH/Console）login, WEB graphic management interface, RMON（Remote Monitoring）MIB, SNMP v1/2. Alert information support relay output, Trap output and Syslog output mode | |
| Power Requirement | Operating Voltage：AC 220V (wide voltage 100 ~ 240V AC) |
Power Consumption：Full-load<10W | |
Indicator Light | Power indicator：P1、P2 |
System Running Status Indicator：SYS | |
Alarm Status Indicator：ALM | |
PON Port Registration Indicator：PON | |
PON Port Fault Indicator：LOS | |
Port Status Indicator：Electrical Port ACT/SPD(1～4) | |
Warranty | 5 Years |
Dimension
Order Information
IP2000-2105-PM13-AC | IP2000-2105-PM13-AC Industrial PON Terminal Optical Network Unit ONU：1 GE PON port, 4 x 1000Base-TX, 1-way input and 3-way output, supporting 12 / 24 / 48VDC and 220VAC, and only one power state can be used at the same time |
Contact: sales
Phone: 18688787693
E-mail: sales@hsindustrialswitch.com
Add: Room 608, Building B,GaoXinQi TEC Park,Baoan District, ShenZhen,China
