HS6000-6028 Rack Mounted 28 Ports Managed Industrial Switch Ethernet Network Switch

The managed switches allow users to manage, configure, as well as monitor the LAN. They allow users to create new LANs and segregate smaller devices and help users manage the traffic effectively. Managed network switches come with advanced features that allow users to recover data in the event of failure of the device or network. They also allow data recovery.

Unmanaged switches may be easy to use, but they come with a fixed configuration, which means you cannot make changes to the networks. This is why it is most commonly used for startup businesses having limited data exchange.

HS6000-6028 Rack Mounted 28 Ports Managed Industrial Switch Ethernet Network Switch is a managed gigabit industrial Ethernet switch that meets the requirements of industrial design. It uses mature technology and open network standards to adapt to low temperature and high temperature, strong electromagnetic interference resistance, salt fog resistance, earthquake resistance and shake resistance, and provides an efficient, reliable and fast solution for the industrial Internet of Things.

HS6000-6028 Rack Mounted 28 Ports Managed Industrial Switch Ethernet Network Switch is positioned at the edge convergence layer of the network. The port configuration is flexible. It supports 24 gigabit copper ports, 2/4 gigabit SFP slots or 4 combo optical multiplexer ports (SFP slots and RJ45 ports). The product can be flexibly customized according to user needs, and can be widely used in industrial control automation, road traffic control automation, building automatic control system, small and medium-sized parks, computer room monitoring system and other application scenarios to provide high performance, stable, reliable and efficient work.

Interface information

100M copper ports: 24 gigabit RJ45 interfaces, 10/100Mbps adaptive

Gigabit interface:2/4 gigabit SFP slots or 4 combo optical multiplexer ports (SFP slots and RJ45 electrical ports)

Console port: provide an RJ45 debugging serial port

Environmental requirements

Operating temperature: - 40 ° C~+75 ° C

Storage temperature: - 40 ° C~+85 ° C

Relative humidity: 5%~95% (non condensing)

MTBF: 500000 hours

Switch Properties

MAC address table: 8K, supporting automatic learning and aging

VLAN：4K

Forwarding method: store and forward

Forwarding frame length: up to 10000Bytes

Mechanical structure

External dimension: 440mm x 190mm x 44mm

Installation mode: 19 inch rack mounted, desktop mounted

Weight: ＜ 2KG

Protection grade: IP40

Transmission distance:

Twisted pair: 100M (standard CAT5/CAT5e cable)

Multimode optical fiber: 850nm, 2Km; 1310nm，5Km

Single mode optical fiber: 1310nm, 20km; 1310nm，40Km； 1310nm，60Km； 1550nm, 80Km optional optical module

Power requirements

Working voltage: 90~260V AC 50/60HZ or 100-300V DC

Overall power consumption ≤ 12W

Software features

Redundant network: support STP/RSTP/MSTP; Support ERPS (G.8032) redundant ring network, network self-healing time ≤ 20ms

Multicast support: support IGMP Snooping V1/V2/V3, support GMRP

VLAN: support IEEE 802.1Q 4K VLAN

QOS: supports COS, DSCP, 8 queues, WRR, SP, WFQ scheduling modes, and policy Qos

Link aggregation: supports manual aggregation, static/dynamic LACP protocols, and multiple load balancing algorithm modes based on MAC and IP

Communication port: support port status view, traffic statistics, disable and use, port duplex rate setting, optical module information and status view

VLAN IP interface: supports virtual IP interface based on Vlan, and supports vlan, IP and subnet mask settings of IP interface

Alarm management: support RMON management and TRAP alarm

Security function: support IEEE802.1X, support user hierarchical management and password protection, support L2-L4 layer ACL access control list, support DDOS, support port based MAC filtering/binding

Data control: support the port speed limit based on ingress/egress, support the half duplex back pressure flow control and 802.3X full duplex flow control, support the storm suppression function based on broadcast, multicast and unknown unicast, support the port loopback detection function, support the port based MAC static binding, enable and disable the port based MAC learning, and support the add/delete/view statistics function of MAC address

DHCP function: supports DHCP Snooping, option82, and DHCP server

Diagnostic maintenance: supports port image, Syslog, and ping commands

System management: support local logs and syslogs, support system management configuration import and export, support CLI, WEB, SNMP management methods and Houshi NIS management system

Indicator lights

Power indicator: P1

System operation indicator: SYS

Port status indicator: copper port (1-24), SFP slot port (25-28)

Order Information: